ECMA codes decryption. Group "F"
Contains variations of designs from different groups.
- Only 1 and 2 pairs are used.
- Pairs 3 and 4 not used, codes "00".
- 5 pair - additional code. See the "X" group.
| Type | Subtype | Code | Design |
|---|---|---|---|
| 10 Rectangular box with a longitudinal glue seam (variations of "A" group) | 10.00 Two separations | 10.11 | Two open separations |
| 10.12 | One open and one closed separations | ||
| 10.13 | Two closed separations | ||
| 10.40 With automatic closing on both sides (used as a tray) | 10.41 | Vertical walls, one or more holes | |
| 10.42 | Vertical walls, two holes / handle for carrying | ||
| 10.45 | Tilted walls, one or more holes | ||
| 10.46 | Tilted walls, two holes / handle for carrying | ||
| 10.50 With hollow flaps / neck | 10.51 | With hollow flaps | |
| 10.80 Special shapes | 10.81 | Closed on both sides, flaps with partial overlap, neck with lock | |
| 10.82 | Telescopic (for flaps see "A" group) | ||
| 10.83 | With rounded sides | ||
| 20 Rectangular box without a longitudinal glue seam (variations of "B" group) | 20.00 4 double walls | 20.01 | Convex lid |
| 20.02 | Convex lid and conical sidewalls | ||
| 20.03 | With sidewalls of different heights | ||
| 20.30 Tray with 4 points of gluing | 20.33 | Lid with additional locks | |
| 20.35 | Dome-shaped lid of two parts, rounded ends | ||
| 20.36 | Dome cover, rounded ends | ||
| 20.37 | Rounded ends | ||
| 20.40 Integrated hinged lid | 20.41 | Hinged lid with glued corners | |
| 20.42 | Hinged lid with folding corners | ||
| 20.43 | Hinged lid with a hole | ||
| 20.50 Retractable tray (shell of group "A") | 20.51 | Tray without connecting corners | |
| 20.52 | Tray with hollow walls | ||
| 20.53 | Two-story tray | ||
| 20.60 | Hinged lid and tray with two gluing points | ||
| 30 Non-rectangular boxes with a longitudinal glue seam (variations of "C" group) | 30.00 Triangular | 30.01 | Triangular base |
| 30.10 Quadrilateral | 30.11 | Trapezoidal sidewalls, closed bottom | |
| 30.20 Hexagonal | 30.21 | Rectangular sidewalls, folding flaps | |
| 30.22 | Rectangular sidewalls, folding flaps, tear-off ZIP-perforation | ||
| 30.50 Polygonal with hollow lid / bottom | 30.51 | Hexagonal with hollow lid | |
| 30.52 | Hexagonal with hollow lid and automatic bottom | ||
| 40 Non-rectangular box without a longitudinal glue seam (variations of "D" group) | 40.00 Triangular | 40.01 | Triangular base, 3 rounded corners |
| 40.02 | Triangular base, 2 rounded corners | ||
| 40.03 | Triangular base, curved walls | ||
| 40.04 | Triangular base, curved walls, 3 rounded corners | ||
| 40.05 | Triangular base, curved walls, 2 rounded corners | ||
| 40.06 | Triangular base, curved walls, 1 rounded corner | ||
| 40.10 Polygonal | 40.11 | Quadrangular with bevelled corners | |
| 40.12 | Octagonal with bevelled corners | ||
| 40.13 | With rounded dustproof corners | ||
| 40.60 For cups | 40.62 | Octagonal base, glued trapezoidal sidewalls | |
| 40.70 Burger Box | 40.71 | Burger Box | |
| 50 Boxes for specific products or product groups (variations of "E" group) | 50.00 Show boxes for product demonstration | 50.01 | Tilted walls (for bottles) |
| 50.02 | Tilted walls and holders (for bottles) | ||
| 50.03 | With base and retainer (for bottles) | ||
| 50.04 | With cut-outs for holding cylindrical products | ||
| 50.10 Show boxes as transport packing | 50.11 | With two round compartments and a glued bottom (for round products) | |
| 50.20 For products of cubic shapes | 50.21 | With front wall | |
| 60 Variations of folding boxes with straight walls | 60.00 Integrated lock, double sidewalls | 60.01 | 2 overlapping walls, inserted central flap |
| 60.02 | 2 overlapping walls, rectangular central flaps | ||
| 60.03 | 2 glued side flaps, beveled walls | ||
| 60.04 | 2 overlapping walls, inserted central flap and lock | ||
| 60.05 | 2 overlapping walls, dustproof flaps | ||
| 60.06 | 2 overlapping walls, inserted top flap | ||
| 60.07 | 2 overlapping walls, rectangular top flaps | ||
| 60.10 Flip top | 60.11 | Bonding on both sides, solid bottom, without liner | |
| 60.12 | Bonding on both sides, solid bottom, separate short liner | ||
| 60.13 | Bonding on both sides, solid bottom, separate long liner | ||
| 60.14 | Bonding on one side, lower and upper flaps integrated to the base liner | ||
| 60.15 | Bonding on one side, bottom and top flaps integrated liner on the side | ||
| 60.16 | Bonding on one side, bottom rectangular flaps, without liner | ||
| 60.20 Bendable on perforation | 60.21 | Solid bottom, double sidewalls | |
| 60.30 Boxes with dividers and a handle on top | 60.31 | 4 cells | |
| 60.32 | 6 cells | ||
| 60.40 Folding boxes with dividers | 60.41 | Single row | |
| 60.42 | Double row | ||
| 60.80 Other folding boxes with straight walls | 60.81 | Octagonal shape with an automatic glued bottom and an integrated lid (lid and bottom rotated at an angle of 45 °) | |
| 60.82 | Twelve-faceted shape with a solid bottom, glued walls and an integrated lid (lid and bottom turned at an angle) | ||
| 60.90 Pockets | 60.91 | Without top flap | |
| 60.92 | With top flap | ||
| 60.93 | With top flap and lock | ||
| 70 Folding boxes with non-flat walls (irregular shape) | 70.00 Pillow shaped (vaulted surfaces) | 70.01 | With overlapping flaps |
| 70.02 | With dust flaps and tear-off perforations | ||
| 70.50 Pockets (with or without lid) | 70.51 | Flat pocket | |
| 70.52 | Fold pocket | ||
| 70.53 | Pocket with sidewalls | ||
| 70.54 | Pocket with folding bottom and sidewalls | ||
| 70.60 Cups | 70.61 | Cylindrical (2 parts) | |
| 70.92 | Conical (2 parts) | ||
| 80 Auxiliary packing products | 80.00 Inserts and separators | 80.01 | Flat inserts |
| 80.02 | Inserts with 2 side walls | ||
| 80.03 | Inserts with 4 side walls | ||
| 80.10 Foldable integrated separators for fixing products | 80.11 | Inserts for 5 bottles | |
| 80.12 | Inserts for 3 bottles | ||
| 80.13 | Part-specific inserts | ||
| 80.20 Inserts and separators for "А" and "F10" groups | 80.21 | 2 compartments | |
| 80.22 | 3 compartments | ||
| 80.23 | 2 diagonal compartments | ||
| 80.24 | Misaligned compartments | ||
| 80.30 Partitions | 80.31 | Crossed partitions | |
| 80.40 Stands | 80.41 | Vertical stand | |
| 80.50 Blisters | 80.51 | Single | |
| 80.52 | Double | ||
| 80.53 | Triple |
Copyright EasyPackMaker™ 2017 – 2025. We like boxes!